Filter By:
- Parts & Accessories (10)
- Combos/Systems (11)
- Headlights (12)
- Taillights (12)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Lighting

$23.95
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install

$60.00
USM-350 E-Lume 350 Lumen Headlight
- All-In-One Design
- Extruded Aluminum Body
- Press and Hold Button Lock
- Daytime Flash Mode
- Up To 90 Hours Runtime
- Integrated USB Rechargeable Li-Ion Battery
- Backlit Button Indicates Charge Status and Low Battery
- Handlebar Bracket
- USB Charging Cable
UTM-30 Cosmo 30 Lumen Tail Light
- 270 Degree High Visibility Design
- Highly Adjustable Mounting System
- Daytime Flash Mode
- 5 Modes: 2 Solid / 3 Flash
- Micro USB Rechargeable

$14.99
The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button!
Button Blinky front specs:
- 2 high output surface mounted LEDs provide steady and flashing modes
- FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm)
- Provides 160° of visibility
- One CR2032 battery (included)
- Mounts with rubber stretch strap
- 18 grams
Button Blinky rear specs:
- 2 high output surface mounted LEDs provide steady and flashing modes
- FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm)
- Provide 160° of visibility
- One CR2032 battery (included)
- Mounts with rubber stretch strap
- 18 grams

$11.89
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

$44.99
The NiteRider Bullet offers excellent rear light projection and daytime visibility with Optimal VIZ. Keep tabs on battery life with the integrated low power indicator.
- 200-lumen output
- Group Ride Mode—be seen without distracting fellow cyclists
- Varying steady and safety flash modes
- USB rechargeable
- FL1 Standard IP64 Water Resistant

$24.99
To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options.
Features
- Lumen Output: 100
- 4 Modes with a Run Time up to 136h
- 2 x AAA Alkaline Battery Powered
- Weight: 82g
- Battery: 2 x AAA Alkaline
- Highly Visible up to 1 Mile
- 100 Lumen Daylight Visible taillight
- Water / Dust Resistant IP64 Rated
Run Time
- Fast Flash—96:00h
- Pulse Flash—136:00h
- Steady High—72:00h
- Steady Low—127:00h

$12.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

$12.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series

$15.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns.
System Compatibility:
- Lumina Series
- MiNewt Mini Series
- Mako Series

$74.99
Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen.
As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining.
- All New Collimator Lens, produces a generous even widespread beam
- Daylight Visible 650 lumen output head light
- CREE LED at 6000k
- Ride safely with Daylight Flash Mode!
- 4 Light Levels plus 1 Daylight Flash Mode
- FL1 Standard IP64, dust and water-resistant
- Secure on and off-road capable Handlebar Mount
- Fits standard and oversize 35mm handlebars
- Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately)
- Convenient USB rechargeable
- Low battery indicator
- Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light.
WARRANTY
- The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Internal Li-Ion Battery
- Handlebar Mount fits up to 35mm
- USB Charging Cable

$109.99
Lumina Micro series delivers high output in a small package, making it great for helmet usage.
Features a modular designed lightweight body combined with increased thermal properties ensuring a brighter, longer lasting LED and a newly designed handlebar strap mount with quick-release tab
- 4 light levels plus a flash mode
- Lumina Micro 900 and 650 include a VMAX+
- Lumens: 650/80
- Run time: up to 50 hrs F/up to 27 hrs R
- Weight: 130g/28g

$84.99
Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters.
- 900 lumen output
- All New Collimator Lens, produces a generous even widespread beam
- 4 Light Levels plus 1 Daylight Flash Mode
- FL1 Standard IP64, dust and water-resistant
- High output light using a CREE LED at 6000k
- Ultra lightweight 900 lumen head light, weighing in at only 130g including mount
- Secure on and off-road handlebar mount
- Fits standard and oversize 35mm handlebars
- Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately)
- Convenient USB rechargeable
- Low battery indicator
- Lock Mode, perfect for use during storage and transporting the light.
Press and hold power button for 8-10 seconds to lock out operation of light.
USB RECHARGEABLE
The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA.
MOUNTING OPTIONS
Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time.
WHAT'S INCLUDED?
- LED Light Head
- Internal Li-Ion Battery
- Handlebar Mount fit up to 35mm
- USB Charging Cable
$14.95
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light!
System Compatibility
- Lumina Series
- MiNewt Mini Series
- Mako Series

$29.99
NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate.
- Side lights
- Economical, high output light
- Super bright flash setting ideal for daylight use
- Easy operation battery operated (comes with 2 x AA)
- 3 light settings – High, Low and Flash
- Lumen Output: 200
- Run Time: 15:00 – 60:00hrs
- Weight: 175g
- Battery: Alkaline AA x 2
WARRANTY
The Mako 200 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components
(housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Handlebar Mount
- 2 AA Alkaline Batteries

$34.99
The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. Our favorite feature is the side "gills" that emits light, it not only looks cool but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate.
The TL 6.0 has five ultra-bright LEDs with four different operating modes, including three different flash modes. The amber Side Lights help to provide even more visibility from the sides of the rider. The TL 6.0 will help keep you safe and seen from behind (180-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash.
Mako 200
- Side lights
- Economical, high output light
- Super bright flash setting ideal for daylight use
- Easy operation battery operated (comes with 2 x AA)
- Run Times: 15:00 – 60:00 hours
- 3 light settings—High, Low, and Flash
- Water / Dust Resistant IP64 Rated
TL 6.0
- 5 Ultra Bright LEDs
- Up to 60 hours run time
- Cost-effective, high-quality light
- Super bright day time flash mode
- 3 operating modes
- Runs on AAA batteries
- Water / Dust Resistant IP64 Rated

$54.99
The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility.
- The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007
- Daylight Visible Flash (DVF)
- Highly visible laser lanes
- All in one, Laser and tail light!
- Convenient USB rechargeable
- Group Ride Mode – be seen without distracting fellow cyclists
- Easy on and off seat post strap mount with quick release tab
- FL1 Standard IP64, dust and water-resistant
WARRANTY
- The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components
(housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Tail Light w/ Laser Lanes
- Seat post Mount
- USB Cable

$54.99
The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle.
- Daylight Visible Flash (DVF)
- 260 lumen super bright tail light
- Group Ride Mode – be seen without distracting fellow cyclists
- Easy on and off Aero seat post strap mount with quick release tab
- Aero seat post strap included
- Convenient USB rechargeable
- Super bright Daylight Visible Flash mode
- Innovative Aero shape with excellent side visibility
- FL1 Standard IP64, dust and water-resistant
WARRANTY
- The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Tail Light
- Seat post Mount
- USB Cable

$49.99
The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We've implemented what we call "Group Ride Mode" for cyclists who want to stay visible but not distract others in the pack.
- Daylight Visible Flash (DVF)
- 250 lumen super bright tail light
- Group Ride Mode – be seen without distracting fellow cyclists
- Easy on and off seat post strap mount with quick release tab
- Convenient USB rechargeable
- Super bright daytime flash mode
- Be Seen by cars = Be Safe
- FL1 Standard IP64, dust and water-resistant
WARRANTY
- The Solas 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Tail Light
- Seat post Mount
- USB Cable

$34.99
The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts.
Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge.
- Highly durable design made with fiberglass reinforced plastic
- Smooth 300 lumen beam pattern in an ultra compact and lightweight design
- Innovative Collimator Lens – optimizes your field of view
- Built-in, easy on and off handlebar strap mount
- 4 Light Levels plus 1 Daylight Flash Mode
- Fuel Gauge / Battery Level Indicator
- FL1 Standard IP64, dust and water-resistant
- Convenient USB rechargeable
WARRANTY
- The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs.
SYSTEM INCLUDES
- LED Light Head
- Internal Li-Ion Battery
- Build-in, Handlebar Mount
- USB Charging Cable

$59.99
The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance.
Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more.
SWIFT 300 FRONT LIGHT FEATURES
- Lumen Output: 300
- 5 Modes with Run Times: 2:00 – 28:00h
- Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA
- Water / Dust Resistant IP64 Rated
- USB Rechargeable
SWIFT 300 TYPICAL RUN TIMES
Low—15:00h at 80 Lumens
Med—9:00h at 150 Lumens
High—2:00h at 300 Lumens
Flash—12:00h at 300 Lumens
Walk—28:00h at 20 Lumens
Vmax+ 150 TAILLIGHT FEATURES
- Lumen Output: 150
- 6 Modes with Run Times: 5:30-27:30h
- Charge Time: 2:00h
- Water / Dust Resistant IP64 Rated
- USB-C Rechargeable
Vmax+ 150 TYPICAL RUN TIMES
Fast Flash—12:45h
Slow Flash—10:15h
Disco Flash—10:45h
Pulse Flash—7:00h
High Steady—5:00h
Low Steady—27:00h

$12.99
The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash.
Features
- Lumen Output: 25
- 4 Modes with a Run Time up to 60h
- 2 x AAA Alkaline Battery Powered
- Weight: 70g
- Battery: 2 x AAA Alkaline
- Increased safety with 210° of Visibility
- Budget Friendly Rear Lighting System
- 25 Lumen taillight with Eye Catching Flash Patterns
- Water / Dust Resistant IP64 Rated
Run Time
- Up to 60h

$4.95
The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL

$14.95
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL

$7.95
$9.99
20% Off
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
- TL 5.0 SL
Not compatible with omega 300 and sentry aero 260 tail lights.

$19.99
NiteRider Adapter sold separately from K-EDGE “Combo Mount”.
Precision Machined 6061-T6 Aluminum
Anodized Gunmetal
Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface
Enables compatibility with K-Edge GoBig Mounts and Combo Mounts
2x M4 Mounting bolts with Nylok included
Compatible with Lumina Series, Mako Series
Weight: 11.5 grams

$24.00
- Maximum output to 20 lumens
- ANSI certified lumens and runtime
- IPX4 water resistant
- Power status indicator alerts remaining run-time before powering off
- Light memory mode
- Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

$19.95
Giant's Numen Mini Lights are small, versatile, and bright. Both the headlight and taillight use super bright LEDs to make sure you're visible in low-light riding situations, and feature your choice of steady or flashing mode. The tool-free rubber mounting hardware is fast, easy to use, and fits nearly every handlebar and seatpost.

$40.00
Features:
- Up to 20 lumens ANSI standard approved
- Runtime: Day mode 4 hrs., High 8 hrs., Middle 15 hrs., Flash 30 hrs.
- Li-Po rechargeable battery
- Low power indicator
- Motion sensor include
- IPX4 waterproof rating
- Charge via Micro USB cable

$61.00
The Recon HL500 is the perfect multi-function light for use on handlebars or helmets. It features abundant light output in a lightweight design.
- Lumens and runtime certified to the ANSI-Standard
- Focused optics with side light design for over 270 degrees visibility
- Heat-dissipating CNC-machined aluminum structure
- Power status indicator can let you know how much run-time to go before powering off
- Includes adjustable GoPro mount
SPECIFICATIONS
- Sizes: 85x26x34mm
- Weight: 81g without mount
- Colors: Black; Gray; Blue; Red
- Output: 500 lumens
- Runtime: High (500LM) 2hrs, Middle 4hrs (300LM), Low 10hrs (100LM), Flash 100hrs, SOS: 100hrs
- Battery: Li-Ion polymer battery (2000mAh)
- Waterproof: IPX6
- Certifications: ANSI-Standard FL-1

$83.00
A brilliant all-round combo, the Recon HL500/TL100 package gives riders ample lumen output and usage time for any casual riding scenario. Both fit easily on just about any Giant helmet and are GoPro mount compatible.
Headlight:
- Lumens and runtime certified to the ANSI-Standard
- Focused optics with side light design for over 270 degrees visibility
- Heat-dissipating CNC-machined aluminum structure
- Power status indicator can let you know how much run-time to go before powering off
- Includes adjustable GoPro mount
Tailight:
- Maximum output to 100 lumens
- ANSI-Standard certified lumen output and runtime
- Water proof to IPX7 standard
- Disperse optics with side light design for over 180-degrees of visibility
- Power status indicator alerts remaining run-time before powering off
- Light memory mode
- Compatible with saddle rail mount, providing optimal angle for visibility
Page 1 of 2
Next page